   |
To set your Tru-Catch trap, raise both rings with your index fingers to the top of the door, use your middle finger to open door. Set door on variable trigger setting and release trigger. (end of rod running length of trap should be slightly up for heavy trigger setting, perpendicular for medium setting and slightly down for a light setting.) Your Tru-Catch trap is now set and ready for bait. Take a small amount of bait and place it about 3 to 4 feet in front of the trap, then about 1 foot in front of the trap, a small amount just inside of the door, and a spoonful just behind the trip pan. Baiting techniques will vary depending on the animal being trapped. To release your catch from the Tru-Catch trap, gently roll the trap over onto its top. The door will automatically open for release. Or you can transfer animal from a deluxe model trap to carrier in an upright position.  Contact us |